H1Z2Z2-K 1.5 kV DC solar cable with a nylon barrier beneath the outer sheath for PV routes that need a non-metallic physical defence against rodent damage.
H1Z2Z2-K 1.5 kV DC solar cable with external steel-wire armour for fixed PV routes exposed to severe rodent activity or mechanical damage.
H1Z2Z2-K 1.5 kV DC solar cable with a capsaicin-based rodent-deterrent sheath for PV routes where chemical protection is preferred over added armour.
Factory-terminated PV extension cable for controlled module, string and combiner-box connections.
Joined twin PV cable for orderly positive and negative string routing beneath solar modules.
Single-core PV cable for reliable DC wiring across rooftop and ground-mounted solar arrays.
Original 4 mm DC PV connector for field-assembled module, string and extension-cable connections.
1500 V DC Original Stäubli PV connector for high-current string, extension and equipment connections.
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
Solid 450/750 V PVC wire for stable fixed circuits in protected conduit and building installations.
Class 2 stranded 300/500 V PVC wire for fixed equipment and panel routes needing moderate flexibility.
Solid 300/500 V PVC wire for simple, stable fixed connections inside protected equipment and conduit.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
300/500 V PVC-sheathed cable for fixed surface and flush-mounted installations in Finnish building wiring.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Green/yellow H07V-K Class 5 copper wire for protective-earth and equipotential-bonding connections in PV, ESS and electrical installations.
Green/yellow H07V-K grounding lead with factory-crimped ring / OT terminal for ready-to-install earthing and bonding connections.
Bare Class 2 stranded copper conductor for earthing and equipotential bonding, available in 16–120 mm².
H1Z2Z2-K 1.5 kV DC solar cable with a nylon barrier beneath the outer sheath for PV routes that need a non-metallic physical defence against rodent damage.
H1Z2Z2-K 1.5 kV DC solar cable with external steel-wire armour for fixed PV routes exposed to severe rodent activity or mechanical damage.
H1Z2Z2-K 1.5 kV DC solar cable with a capsaicin-based rodent-deterrent sheath for PV routes where chemical protection is preferred over added armour.
Factory-terminated PV extension cable for controlled module, string and combiner-box connections.
Joined twin PV cable for orderly positive and negative string routing beneath solar modules.
Single-core PV cable for reliable DC wiring across rooftop and ground-mounted solar arrays.
Green/yellow H07V-K Class 5 copper wire for protective-earth and equipotential-bonding connections in PV, ESS and electrical installations.
Green/yellow H07V-K grounding lead with factory-crimped ring / OT terminal for ready-to-install earthing and bonding connections.
Bare Class 2 stranded copper conductor for earthing and equipotential bonding, available in 16–120 mm².
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
Solid 450/750 V PVC wire for stable fixed circuits in protected conduit and building installations.
Class 2 stranded 300/500 V PVC wire for fixed equipment and panel routes needing moderate flexibility.
Solid 300/500 V PVC wire for simple, stable fixed connections inside protected equipment and conduit.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
300/500 V PVC-sheathed cable for fixed surface and flush-mounted installations in Finnish building wiring.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Single-core 1.8/3 kV copper XLPE cable with non-magnetic stainless-steel tape armour, PVC sheath and Category C flame-retardant construction for protected fixed power routes.
Aluminium XLPE medium-voltage cable with longitudinal water blocking for fixed distribution networks.
0.6/1 kV copper cable with a wave-laid concentric conductor for fixed distribution and service routes.
0.6/1 kV copper power cable with a concentric copper layer for service and distribution circuits.
Aluminium halogen-free 0.6/1 kV cable for fire-conscious fixed distribution and long feeders.
Aluminium XLPE power cable for economical fixed distribution, available in 0.6/1 kV and 1.8/3 kV constructions for long outdoor and buried routes.
Copper XLPE 0.6/1 kV cable for demanding fixed feeders, outdoor routes and power distribution.
Aluminium 0.6/1 kV PVC cable for cost-conscious fixed distribution and long feeder routes.
Robust 0.6/1 kV copper cable for economical fixed power distribution indoors, outdoors and underground.
Low-smoke halogen-free 0.6/1 kV cable for fixed distribution in occupied and critical buildings.
hot search
H07V-U forms neat, permanent 450/750 V connections where simple routes and compatible terminals favour solid conductors.
H07V-U uses a solid Class 1 copper conductor for protected 450/750 V circuits in conduit, distribution boards and fixed building wiring. On straightforward routes, the conductor feeds predictably and keeps the shape formed during installation. This makes it well suited to permanent circuits that remain stationary after commissioning.
Solid copper provides a simple contact interface in terminals designed for Class 1 conductors. Consistent stripping, insertion and clamping are useful in distribution equipment with many similar fixed connections, while the conductor holds its position close to terminal rows. This supports orderly installation without the strand-management requirements of a stranded conductor.
Not every fixed circuit benefits from additional conductor flexibility. Where the route is direct and movement after installation is minimal, H07V-U provides a simple Class 1 solution without introducing strands that the application does not need. H07V-R or H07V-K remain available when bends, routing constraints or termination conditions make a stranded conductor more appropriate.
Designed for Building conduits, Lighting circuits, Fixed distribution wiring and Protected switchboard routes.
| Nominal size mm² | Insulation mm | Nominal OD mm | Approx. weight kg/km |
|---|---|---|---|
| 1 × 1.5 | 0.7 | 2.9 | 22 |
| 1 × 2.5 | 0.8 | 3.6 | 32 |
| 1 × 4 | 0.8 | 4.1 | 50 |
| 1 × 6 | 0.8 | 4.7 | 71 |
| 1 × 10 | 1.0 | 5.9 | 110 |
Dimensions are nominal and may vary within the applicable product tolerance.
Download TDS
Yes. Send the exact cable designation and, where possible, the existing datasheet or project specification. We compare conductor material, construction, voltage rating, standards and the requirements that affect the installation before confirming whether an equivalent can be offered.
Send the exact requirement. The website does not represent every possible production combination. We will check whether the construction can be supplied and whether the required standards or certification scope also cover that version before it is quoted.
No single MOQ applies across the entire range. The practical quantity depends on the cable type, size, construction, packing and production conditions. Send the actual cable list and quantities and we can confirm the applicable requirement for those items.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
