H1Z2Z2-K 1.5 kV DC solar cable with a nylon barrier beneath the outer sheath for PV routes that need a non-metallic physical defence against rodent damage.
H1Z2Z2-K 1.5 kV DC solar cable with external steel-wire armour for fixed PV routes exposed to severe rodent activity or mechanical damage.
H1Z2Z2-K 1.5 kV DC solar cable with a capsaicin-based rodent-deterrent sheath for PV routes where chemical protection is preferred over added armour.
Factory-terminated PV extension cable for controlled module, string and combiner-box connections.
Joined twin PV cable for orderly positive and negative string routing beneath solar modules.
Single-core PV cable for reliable DC wiring across rooftop and ground-mounted solar arrays.
Original 4 mm DC PV connector for field-assembled module, string and extension-cable connections.
1500 V DC Original Stäubli PV connector for high-current string, extension and equipment connections.
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
Solid 450/750 V PVC wire for stable fixed circuits in protected conduit and building installations.
Class 2 stranded 300/500 V PVC wire for fixed equipment and panel routes needing moderate flexibility.
Solid 300/500 V PVC wire for simple, stable fixed connections inside protected equipment and conduit.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
300/500 V PVC-sheathed cable for fixed surface and flush-mounted installations in Finnish building wiring.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Green/yellow H07V-K Class 5 copper wire for protective-earth and equipotential-bonding connections in PV, ESS and electrical installations.
Green/yellow H07V-K grounding lead with factory-crimped ring / OT terminal for ready-to-install earthing and bonding connections.
Bare Class 2 stranded copper conductor for earthing and equipotential bonding, available in 16–120 mm².
H1Z2Z2-K 1.5 kV DC solar cable with a nylon barrier beneath the outer sheath for PV routes that need a non-metallic physical defence against rodent damage.
H1Z2Z2-K 1.5 kV DC solar cable with external steel-wire armour for fixed PV routes exposed to severe rodent activity or mechanical damage.
H1Z2Z2-K 1.5 kV DC solar cable with a capsaicin-based rodent-deterrent sheath for PV routes where chemical protection is preferred over added armour.
Factory-terminated PV extension cable for controlled module, string and combiner-box connections.
Joined twin PV cable for orderly positive and negative string routing beneath solar modules.
Single-core PV cable for reliable DC wiring across rooftop and ground-mounted solar arrays.
Green/yellow H07V-K Class 5 copper wire for protective-earth and equipotential-bonding connections in PV, ESS and electrical installations.
Green/yellow H07V-K grounding lead with factory-crimped ring / OT terminal for ready-to-install earthing and bonding connections.
Bare Class 2 stranded copper conductor for earthing and equipotential bonding, available in 16–120 mm².
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
Solid 450/750 V PVC wire for stable fixed circuits in protected conduit and building installations.
Class 2 stranded 300/500 V PVC wire for fixed equipment and panel routes needing moderate flexibility.
Solid 300/500 V PVC wire for simple, stable fixed connections inside protected equipment and conduit.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
300/500 V PVC-sheathed cable for fixed surface and flush-mounted installations in Finnish building wiring.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Single-core 1.8/3 kV copper XLPE cable with non-magnetic stainless-steel tape armour, PVC sheath and Category C flame-retardant construction for protected fixed power routes.
Aluminium XLPE medium-voltage cable with longitudinal water blocking for fixed distribution networks.
0.6/1 kV copper cable with a wave-laid concentric conductor for fixed distribution and service routes.
0.6/1 kV copper power cable with a concentric copper layer for service and distribution circuits.
Aluminium halogen-free 0.6/1 kV cable for fire-conscious fixed distribution and long feeders.
Aluminium XLPE power cable for economical fixed distribution, available in 0.6/1 kV and 1.8/3 kV constructions for long outdoor and buried routes.
Copper XLPE 0.6/1 kV cable for demanding fixed feeders, outdoor routes and power distribution.
Aluminium 0.6/1 kV PVC cable for cost-conscious fixed distribution and long feeder routes.
Robust 0.6/1 kV copper cable for economical fixed power distribution indoors, outdoors and underground.
Low-smoke halogen-free 0.6/1 kV cable for fixed distribution in occupied and critical buildings.
hot search
Standard market cable types can be matched directly to the corresponding HORNOUR type.
Where national cable designations differ, the corresponding HORNOUR cable type is identified before detailed technical verification.
H1Z2Z2-K, N2XH, N2XY, NA2XS(F)2Y and other established cable designations can be matched directly by type, conductor size and required version.
Finnish, French, British and other national cable designations are mapped to the corresponding HORNOUR cable type before detailed technical verification.
A corresponding designation alone is not sufficient. The proposed cable must also meet the technical and approval requirements relevant to the specified product.
Applicable EN, IEC, VDE or national requirements, CPR classification, DoP and required certification.
Rated voltage, conductor material, conductor class, cross-section and other specified electrical requirements.
Insulation and sheath materials, screen, armour, water-blocking construction and relevant dimensional requirements.
Temperature range, flame performance, UV and water resistance, bending requirements and other specified characteristics.
Each comparison is concluded as a Direct Match, Alternative or No Direct Match according to the specified requirements.
The HORNOUR product meets the specified cable type and the relevant technical and approval requirements.
A suitable HORNOUR cable is available, but one or more relevant differences require confirmation before substitution.
The specified requirement is outside the current HORNOUR standard range or includes a condition that the proposed cable does not meet.
The substitution assessment is supported by the technical and compliance information relevant to the specified cable.
Send the available cable reference or technical information. A complete project specification is not required.
Provide the cable type, conductor size and voltage rating where available.
Include the applicable national standard, CPR class or required certification where specified.
Provide the current product datasheet or technical specification where the designation alone is not sufficient.
Submit Cable Specification
