H1Z2Z2-K 1.5 kV DC solar cable with a nylon barrier beneath the outer sheath for PV routes that need a non-metallic physical defence against rodent damage.
H1Z2Z2-K 1.5 kV DC solar cable with external steel-wire armour for fixed PV routes exposed to severe rodent activity or mechanical damage.
H1Z2Z2-K 1.5 kV DC solar cable with a capsaicin-based rodent-deterrent sheath for PV routes where chemical protection is preferred over added armour.
Factory-terminated PV extension cable for controlled module, string and combiner-box connections.
Joined twin PV cable for orderly positive and negative string routing beneath solar modules.
Single-core PV cable for reliable DC wiring across rooftop and ground-mounted solar arrays.
Original 4 mm DC PV connector for field-assembled module, string and extension-cable connections.
1500 V DC Original Stäubli PV connector for high-current string, extension and equipment connections.
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
Solid 450/750 V PVC wire for stable fixed circuits in protected conduit and building installations.
Class 2 stranded 300/500 V PVC wire for fixed equipment and panel routes needing moderate flexibility.
Solid 300/500 V PVC wire for simple, stable fixed connections inside protected equipment and conduit.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
300/500 V PVC-sheathed cable for fixed surface and flush-mounted installations in Finnish building wiring.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Green/yellow H07V-K Class 5 copper wire for protective-earth and equipotential-bonding connections in PV, ESS and electrical installations.
Green/yellow H07V-K grounding lead with factory-crimped ring / OT terminal for ready-to-install earthing and bonding connections.
Bare Class 2 stranded copper conductor for earthing and equipotential bonding, available in 16–120 mm².
H1Z2Z2-K 1.5 kV DC solar cable with a nylon barrier beneath the outer sheath for PV routes that need a non-metallic physical defence against rodent damage.
H1Z2Z2-K 1.5 kV DC solar cable with external steel-wire armour for fixed PV routes exposed to severe rodent activity or mechanical damage.
H1Z2Z2-K 1.5 kV DC solar cable with a capsaicin-based rodent-deterrent sheath for PV routes where chemical protection is preferred over added armour.
Factory-terminated PV extension cable for controlled module, string and combiner-box connections.
Joined twin PV cable for orderly positive and negative string routing beneath solar modules.
Single-core PV cable for reliable DC wiring across rooftop and ground-mounted solar arrays.
Green/yellow H07V-K Class 5 copper wire for protective-earth and equipotential-bonding connections in PV, ESS and electrical installations.
Green/yellow H07V-K grounding lead with factory-crimped ring / OT terminal for ready-to-install earthing and bonding connections.
Bare Class 2 stranded copper conductor for earthing and equipotential bonding, available in 16–120 mm².
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
Solid 450/750 V PVC wire for stable fixed circuits in protected conduit and building installations.
Class 2 stranded 300/500 V PVC wire for fixed equipment and panel routes needing moderate flexibility.
Solid 300/500 V PVC wire for simple, stable fixed connections inside protected equipment and conduit.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
300/500 V PVC-sheathed cable for fixed surface and flush-mounted installations in Finnish building wiring.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Single-core 1.8/3 kV copper XLPE cable with non-magnetic stainless-steel tape armour, PVC sheath and Category C flame-retardant construction for protected fixed power routes.
Aluminium XLPE medium-voltage cable with longitudinal water blocking for fixed distribution networks.
0.6/1 kV copper cable with a wave-laid concentric conductor for fixed distribution and service routes.
0.6/1 kV copper power cable with a concentric copper layer for service and distribution circuits.
Aluminium halogen-free 0.6/1 kV cable for fire-conscious fixed distribution and long feeders.
Aluminium XLPE power cable for economical fixed distribution, available in 0.6/1 kV and 1.8/3 kV constructions for long outdoor and buried routes.
Copper XLPE 0.6/1 kV cable for demanding fixed feeders, outdoor routes and power distribution.
Aluminium 0.6/1 kV PVC cable for cost-conscious fixed distribution and long feeder routes.
Robust 0.6/1 kV copper cable for economical fixed power distribution indoors, outdoors and underground.
Low-smoke halogen-free 0.6/1 kV cable for fixed distribution in occupied and critical buildings.
hot search
N2XH provides XLPE-insulated, halogen-free power distribution where smoke, corrosive gases and evacuation conditions matter.
Occupied buildings, data facilities and indoor energy plants place greater importance on smoke and corrosive gas behaviour during a fire. N2XH combines XLPE insulation with a low-smoke, halogen-free outer sheath for fixed 0.6/1 kV distribution. This makes it a strong fit for feeders that pass through spaces where reducing smoke density and corrosive combustion products is part of the cable-selection strategy.
N2XH provides a copper-conductor option for inverter AC output, switchboards and fixed building feeders where a halogen-free sheath is required. The copper conductor keeps termination geometry compact, while XLPE insulation supports demanding fixed power distribution. It is particularly useful when the project wants conventional copper termination practice together with improved fire behaviour in the installed cable system.
N2XH-J includes a green/yellow protective conductor, while N2XH-O does not. Selecting the correct construction at design stage keeps the core arrangement, gland size and terminal space aligned with the circuit’s earthing strategy. This is especially important in crowded plant rooms and distribution boards where changing the protective-conductor arrangement late in the project can affect both cable sizing and equipment entries.
Designed for PV inverter AC output, Commercial buildings, Indoor distribution routes and Industrial power systems.
| Configuration | Outer diameter approx. mm | Approx. cable weight kg/km |
|---|---|---|
| 1 × 1.5 | 6.0 | 41 |
| 1 × 2.5 | 6.5 | 53 |
| 1 × 4 | 8.0 | 68 |
| 1 × 6 | 9.0 | 90 |
| 1 × 10 | 9.0 | 140 |
| 1 × 16 | 10.0 | 190 |
| 1 × 25 | 11.0 | 290 |
| 1 × 35 | 12.0 | 390 |
| 1 × 50 | 15.0 | 510 |
| 1 × 70 | 17.0 | 710 |
| 1 × 95 | 19.0 | 960 |
| 1 × 120 | 21.0 | 1200 |
| 1 × 150 | 23.0 | 1480 |
| 1 × 185 | 25.0 | 1910 |
| 1 × 240 | 28.0 | 2370 |
| 1 × 300 | 30.0 | 2970 |
| 1 × 400 | 32.9 | 3957 |
| 2 × 1.5 | 12.0 | 185 |
| 2 × 2.5 | 12.2 | 220 |
| 2 × 4 | 13.2 | 275 |
| 2 × 6 | 14.1 | 335 |
| 2 × 10 | 16.2 | 450 |
| 2 × 16 | 17.8 | 620 |
| 2 × 25 | 21.0 | 930 |
| 3 × 1.5 | 13.0 | 220 |
| 3 × 2.5 | 14.0 | 280 |
| 3 × 4 | 15.0 | 350 |
| 3 × 6 | 16.0 | 420 |
| 3 × 10 | 18.0 | 600 |
| 3 × 16 | 20.0 | 770 |
| 3 × 25 | 21.8 | 1120 |
| 3 × 35 | 24.9 | 1550 |
| 3 × 50 | 25.2 | 1750 |
| 3 × 70 | 29.2 | 2450 |
| 3 × 95 | 32.0 | 3250 |
| 3 × 120 | 34.9 | 4000 |
| 3 × 150 | 39.2 | 5000 |
| 3 × 185 | 44.1 | 6150 |
| 3 × 240 | 49.2 | 8000 |
| 4 × 1.5 | 13.0 | 235 |
| 4 × 2.5 | 14.0 | 290 |
| 4 × 4 | 15.0 | 370 |
| 4 × 6 | 16.0 | 470 |
| 4 × 10 | 18.0 | 670 |
| 4 × 16 | 20.0 | 930 |
| 4 × 25 | 25.0 | 1440 |
| 4 × 35 | 27.0 | 1890 |
| 4 × 50 | 28.0 | 2300 |
| 4 × 70 | 32.0 | 3200 |
| 4 × 95 | 36.0 | 4250 |
| 4 × 120 | 40.2 | 5350 |
| 4 × 150 | 45.8 | 6550 |
| 4 × 185 | 49.5 | 8100 |
| 4 × 240 | 56.0 | 10550 |
| 5 × 1.5 | 14.5 | 280 |
| 5 × 2.5 | 16.0 | 350 |
| 5 × 4 | 17.0 | 450 |
| 5 × 6 | 18.5 | 600 |
| 5 × 10 | 21.0 | 850 |
| 5 × 16 | 24.0 | 1200 |
| 5 × 25 | 28.0 | 1539 |
Dimensions vary by core count and conductor size; use the exact selected construction for gland and termination sizing.
Download TDS
No. They can share the same 0.6/1 kV voltage class, but their insulation, sheath materials, fire behaviour and intended installation conditions differ. The required cable should follow the route and fire specification rather than the voltage rating alone.
Yes, this can be reviewed, but aluminium is not normally a size-for-size replacement for copper. Current, route length, voltage drop, installation method, available space and the equipment termination system all need to be checked before an alternative size is proposed.
Yes. Send the exact cable designation and, where possible, the existing datasheet or project specification. We compare conductor material, construction, voltage rating, standards and the requirements that affect the installation before confirming whether an equivalent can be offered.
Send the exact requirement. The website does not represent every possible production combination. We will check whether the construction can be supplied and whether the required standards or certification scope also cover that version before it is quoted.
Flexible halogen-free AC charging cable for electric and plug-in hybrid vehicles.
Robust 0.6/1 kV copper cable for economical fixed power distribution indoors, outdoors and underground.
Copper XLPE 0.6/1 kV cable for demanding fixed feeders, outdoor routes and power distribution.
Aluminium halogen-free 0.6/1 kV cable for fire-conscious fixed distribution and long feeders.
