H1Z2Z2-K 1.5 kV DC solar cable with a nylon barrier beneath the outer sheath for PV routes that need a non-metallic physical defence against rodent damage.
H1Z2Z2-K 1.5 kV DC solar cable with external steel-wire armour for fixed PV routes exposed to severe rodent activity or mechanical damage.
H1Z2Z2-K 1.5 kV DC solar cable with a capsaicin-based rodent-deterrent sheath for PV routes where chemical protection is preferred over added armour.
Factory-terminated PV extension cable for controlled module, string and combiner-box connections.
Joined twin PV cable for orderly positive and negative string routing beneath solar modules.
Single-core PV cable for reliable DC wiring across rooftop and ground-mounted solar arrays.
Original 4 mm DC PV connector for field-assembled module, string and extension-cable connections.
1500 V DC Original Stäubli PV connector for high-current string, extension and equipment connections.
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
Solid 450/750 V PVC wire for stable fixed circuits in protected conduit and building installations.
Class 2 stranded 300/500 V PVC wire for fixed equipment and panel routes needing moderate flexibility.
Solid 300/500 V PVC wire for simple, stable fixed connections inside protected equipment and conduit.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
300/500 V PVC-sheathed cable for fixed surface and flush-mounted installations in Finnish building wiring.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Green/yellow H07V-K Class 5 copper wire for protective-earth and equipotential-bonding connections in PV, ESS and electrical installations.
Green/yellow H07V-K grounding lead with factory-crimped ring / OT terminal for ready-to-install earthing and bonding connections.
Bare Class 2 stranded copper conductor for earthing and equipotential bonding, available in 16–120 mm².
H1Z2Z2-K 1.5 kV DC solar cable with a nylon barrier beneath the outer sheath for PV routes that need a non-metallic physical defence against rodent damage.
H1Z2Z2-K 1.5 kV DC solar cable with external steel-wire armour for fixed PV routes exposed to severe rodent activity or mechanical damage.
H1Z2Z2-K 1.5 kV DC solar cable with a capsaicin-based rodent-deterrent sheath for PV routes where chemical protection is preferred over added armour.
Factory-terminated PV extension cable for controlled module, string and combiner-box connections.
Joined twin PV cable for orderly positive and negative string routing beneath solar modules.
Single-core PV cable for reliable DC wiring across rooftop and ground-mounted solar arrays.
Green/yellow H07V-K Class 5 copper wire for protective-earth and equipotential-bonding connections in PV, ESS and electrical installations.
Green/yellow H07V-K grounding lead with factory-crimped ring / OT terminal for ready-to-install earthing and bonding connections.
Bare Class 2 stranded copper conductor for earthing and equipotential bonding, available in 16–120 mm².
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
Solid 450/750 V PVC wire for stable fixed circuits in protected conduit and building installations.
Class 2 stranded 300/500 V PVC wire for fixed equipment and panel routes needing moderate flexibility.
Solid 300/500 V PVC wire for simple, stable fixed connections inside protected equipment and conduit.
Class 2 stranded 450/750 V PVC wire for protected fixed routes requiring easier pulling and forming.
300/500 V PVC-sheathed cable for fixed surface and flush-mounted installations in Finnish building wiring.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Single-core 1.8/3 kV copper XLPE cable with non-magnetic stainless-steel tape armour, PVC sheath and Category C flame-retardant construction for protected fixed power routes.
Aluminium XLPE medium-voltage cable with longitudinal water blocking for fixed distribution networks.
0.6/1 kV copper cable with a wave-laid concentric conductor for fixed distribution and service routes.
0.6/1 kV copper power cable with a concentric copper layer for service and distribution circuits.
Aluminium halogen-free 0.6/1 kV cable for fire-conscious fixed distribution and long feeders.
Aluminium XLPE power cable for economical fixed distribution, available in 0.6/1 kV and 1.8/3 kV constructions for long outdoor and buried routes.
Copper XLPE 0.6/1 kV cable for demanding fixed feeders, outdoor routes and power distribution.
Aluminium 0.6/1 kV PVC cable for cost-conscious fixed distribution and long feeder routes.
Robust 0.6/1 kV copper cable for economical fixed power distribution indoors, outdoors and underground.
Low-smoke halogen-free 0.6/1 kV cable for fixed distribution in occupied and critical buildings.
hot search
MMJ is a 300/500 V PVC-sheathed installation cable to SFS 2091 for fixed surface and concealed building wiring. The range covers 2–5 cores from 1.5 to 35 mm², with CPR Eca fire performance for construction projects.
MMJ is used for fixed building circuits that may move between surface-mounted and concealed routes within the same project. It can be installed in residential, commercial and industrial environments and is also suitable for concrete or plaster-covered routes where the installation method permits. This gives contractors one familiar 300/500 V cable family across a wide range of Finnish building-wiring situations.
The HORNOUR MMJ/MMO construction covers 2-, 3-, 4- and 5-core cables from 1.5 mm² to 35 mm². That range extends the product beyond small final circuits and allows the same cable family to serve larger fixed distribution duties. For contractors and wholesalers, a broader size range simplifies specification and stocking while keeping the construction and installation practice consistent.
MMJ is available with CPR Eca reaction-to-fire performance for permanent installation in construction works. This gives designers and contractors a clearly defined fire classification at the cable-selection stage and supports straightforward matching to the building’s specified reaction-to-fire requirement without changing the basic SFS 2091 cable family.
Designed for Residential fixed wiring, Commercial building wiring, Flush-mounted installation and Surface-mounted installation.
| Description | Cross Section mm² | Conductor type RE/RM | OD of conductor mm | Thickness of insulation mm | Thickness of inner sheath mm | Thickness of outer sheath mm | Cable overall diameter mm | Current Capacity in air A | Cu weight kg/km | Cable weight kg/km |
|---|---|---|---|---|---|---|---|---|---|---|
| MMO/MMJ 300/500V | 2 × 1.5 | RE | 1.6 | 0.7 | 0.4 | 1.2 | 8.7 | 17.5 | 29 | 125 |
| MMO/MMJ 300/500V | 2 × 2.5 | RE | 2.0 | 0.8 | 0.4 | 1.2 | 10.0 | 24 | 48 | 165 |
| MMO/MMJ 300/500V | 2 × 4 | RE | 2.5 | 0.8 | 0.4 | 1.2 | 11.0 | 32 | 77 | 215 |
| MMO/MMJ 300/500V | 2 × 6 | RE | 3.1 | 0.8 | 0.4 | 1.2 | 12.2 | 41 | 115 | 280 |
| MMO/MMJ 300/500V | 2 × 10 | RE | 4.0 | 1.0 | 0.6 | 1.4 | 15.4 | 57 | 192 | 455 |
| MMO/MMJ 300/500V | 2 × 16 | RM | 5.0 | 1.0 | 0.6 | 1.4 | 17.4 | 76 | 307 | 630 |
| MMO/MMJ 300/500V | 2 × 25 | RM | 6.3 | 1.2 | 0.8 | 1.4 | 21.0 | 96 | 480 | 950 |
| MMO/MMJ 300/500V | 2 × 35 | RM | 7.1 | 1.2 | 1.0 | 1.6 | 23.2 | 119 | 672 | 1250 |
| MMO/MMJ 300/500V | 3 × 1.5 | RE | 1.6 | 0.7 | 0.4 | 1.2 | 9.1 | 17.5 | 43 | 135 |
| MMO/MMJ 300/500V | 3 × 2.5 | RE | 2.0 | 0.8 | 0.4 | 1.2 | 10.4 | 24 | 72 | 190 |
| MMO/MMJ 300/500V | 3 × 4 | RE | 2.5 | 0.8 | 0.4 | 1.2 | 11.8 | 32 | 115 | 258 |
| MMO/MMJ 300/500V | 3 × 6 | RE | 3.1 | 0.8 | 0.4 | 1.4 | 13.0 | 41 | 173 | 337 |
| MMO/MMJ 300/500V | 3 × 10 | RE | 4.0 | 1.0 | 0.6 | 1.4 | 15.9 | 57 | 288 | 528 |
| MMO/MMJ 300/500V | 3 × 16 | RM | 5.0 | 1.0 | 0.8 | 1.4 | 18.1 | 76 | 461 | 731 |
| MMO/MMJ 300/500V | 3 × 25 | RM | 6.3 | 1.2 | 0.8 | 1.6 | 22.2 | 96 | 720 | 1115 |
| MMO/MMJ 300/500V | 3 × 35 | RM | 7.1 | 1.2 | 1.0 | 1.6 | 24.5 | 119 | 1008 | 1462 |
| MMO/MMJ 300/500V | 4 × 1.5 | RE | 1.6 | 0.7 | 0.4 | 1.2 | 9.8 | 17.5 | 58 | 160 |
| MMO/MMJ 300/500V | 4 × 2.5 | RE | 2.0 | 0.8 | 0.4 | 1.2 | 11.3 | 24 | 96 | 230 |
| MMO/MMJ 300/500V | 4 × 4 | RE | 2.5 | 0.8 | 0.4 | 1.4 | 13.0 | 32 | 154 | 330 |
| MMO/MMJ 300/500V | 4 × 6 | RE | 3.1 | 0.8 | 0.6 | 1.4 | 15.1 | 41 | 230 | 460 |
| MMO/MMJ 300/500V | 4 × 10 | RE | 4.0 | 1.0 | 0.6 | 1.4 | 17.6 | 57 | 384 | 680 |
| MMO/MMJ 300/500V | 4 × 16 | RM | 5.0 | 1.0 | 0.8 | 1.4 | 21.3 | 76 | 614 | 1048 |
| MMO/MMJ 300/500V | 4 × 25 | RM | 6.3 | 1.2 | 1.0 | 1.6 | 25.8 | 96 | 960 | 1649 |
| MMO/MMJ 300/500V | 4 × 35 | RM | 7.1 | 1.2 | 1.0 | 1.6 | 28.5 | 119 | 1344 | 2000 |
| MMO/MMJ 300/500V | 5 × 1.5 | RE | 1.6 | 0.7 | 0.4 | 1.2 | 10.3 | 17.5 | 72 | 190 |
| MMO/MMJ 300/500V | 5 × 2.5 | RE | 2.0 | 0.8 | 0.4 | 1.2 | 12.0 | 24 | 120 | 270 |
| MMO/MMJ 300/500V | 5 × 4 | RE | 2.5 | 0.8 | 0.6 | 1.4 | 14.5 | 32 | 192 | 410 |
| MMO/MMJ 300/500V | 5 × 6 | RE | 3.1 | 0.8 | 0.6 | 1.4 | 16.1 | 41 | 288 | 540 |
| MMO/MMJ 300/500V | 5 × 10 | RE | 4.0 | 1.0 | 0.6 | 1.4 | 19.2 | 57 | 480 | 850 |
| MMO/MMJ 300/500V | 5 × 16 | RM | 5.0 | 1.0 | 0.8 | 1.6 | 23.4 | 76 | 768 | 1280 |
| MMO/MMJ 300/500V | 5 × 25 | RM | 6.3 | 1.2 | 1.0 | 1.6 | 28.7 | 96 | 1200 | 1970 |
| MMO/MMJ 300/500V | 5 × 35 | RM | 7.1 | 1.2 | 1.2 | 1.6 | 31.9 | 119 | 1680 | 2500 |
The table covers 2–5 core constructions from 1.5 to 35 mm².
Download TDS
Not automatically. MMJ is specified in the Finnish market under SFS 2091, while NYM belongs to a different product and standards environment. The project specification, core arrangement, installation method and fire requirement should be checked before either cable is proposed as a substitute.
Yes. Send the exact cable designation and, where possible, the existing datasheet or project specification. We compare conductor material, construction, voltage rating, standards and the requirements that affect the installation before confirming whether an equivalent can be offered.
Send the exact requirement. The website does not represent every possible production combination. We will check whether the construction can be supplied and whether the required standards or certification scope also cover that version before it is quoted.
Flexible 450/750 V PVC wire for protected conduit, panel and grounding connections.
Flexible 300/500 V PVC wire for compact equipment, switchgear and control-panel connections.
PVC-sheathed 300/500 V cable for fixed power and lighting circuits inside buildings and panels.
